Dunlop MXR M238 Iso-Brick Power Supply, 10 Variable Outputs with Cables

MXR

(No reviews yet) Write a Review
MSRP: $214.27
$172.99
(You save $41.28 )
SKU:
MXR-M238-KIT1
UPC:
710137086654
Shipping:
Free Shipping
Brand:
MXR
MPN:
MXR-M238
UPC:
710137086654
Adding to cart… The item has been added

Product Overview

MXR M238 ISO-BRICK Power Supply with 4 Cables - 2 Instrument Cables 10', 2 Patch Cables 6"

This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V-including two variable 6V-15V outputs-and special noise-reduction circuitry for quiet operation.

The Iso-Brick Power Supply is small and light with tons of quiet, noise-free DC power on tap ready to run a wide range of pedal types without crowding or weighing down your pedalboard.

Each of the Iso-Brick Power Supply's 10 outputs is fully isolated, eliminating gig-ending ground loop noise. Whether analog or digital, positive or negative ground, this power box has you covered. The MXR team broke down these 10 outputs to accommodate a variety of voltage and current requirements: two 9V outputs at 100mA, two 9V outputs at 300mA, two 9V outputs at 450mA, two 18V outputs at 250mA, and two variable outputs adjustable from 6V to 15V at 250mA. The two variable outputs can be used to emulate voltage ?sag,?a drained battery effect sought by many vintage tonechasers.

On top of all that, the Iso-Brick Power Supply comes in a small, lightweight housing that's built like a tank. Features power on/off and connection status LEDs. Put this little box on your pedalboard to make sure it runs reliably and quietly gig after gig.

Features:

  • Dunlop MXR M238 ISO-BRICK Power Supply
  • Includes 2 Instrument Cables 10', 2 Patch Cables 6"
  • 10 fully isolated outputs
  • Quiet, noise-free operation
  • Powers a wide range of pedal types—digital and analog, positive and negative ground
  • Variable outputs can be used to emulate drained battery effect
  • The Iso-Brick Power Supply requires an 18V regulated power supply rated at 2000 mA, with 5.5mm x 2.1mm positive barrel, negative center plug. The included power adapter can utilize a wide range of wall power, from 100–240V at 47–63Hz. Comes with switchable US/Japan, UK, EU, and Australian plugs

Specifications:

  • INPUT: 18V @ 2 Amps - regulated supply (positive barrel negative center 5.5mm x 2.1mm plug)
  • OUTPUTS: 6-15V @ 250mA (2), 18V @ 250mA (2), 9V @ 450mA (2), 9V @ 300mA (2), 9V @ 100mA (2)
  • (all positive barrel negative center 5.5mm x 2.1mm)
  • UPC: 710137086654
  • MPN: MXR-M238

Reviews

(No reviews yet) Write a Review